Supplier Spotlight

Video Exclusives

The next-gen valvetrain?

gtr

Camcon Automotive has developed a digitally controlled intelligent valve operation, which it states can significantly increases engine economy and flexibility.


EV lap records

gtr

NIO showcases its blistering Nurburgring Nordschleife lap time, as it topples the existing record.


Click here/on image to watch video

Weekly Poll

With the Dodge Challenger SRT Demon and Jeep Grand Cherokee Trackhawk dominating the news following the New York Autoshow does this mean that the non-electrically assisted V8 still has a very relevant place in the industry amongst consumers?

Yes - For every person convinced that electrical power is the future, there are just as many who don't. Conventionally fuelled vehicles will always be popular with consumers until regulations end their existence
No - They are little more than limited edition, halo car-type runs that help generate publicity for other products in the family

Recent Polls

  • Following on from Graham Johnson's column in the latest issue of Engine Technology International (click here), do you think that CO2 emissions are the right focus for the automotive industry?
  • As part of its future powertrain plans, Mercedes-Benz is set to extend its gasoline particulate filter (GPF) technology across a wider range of engines. Will GPF technology be adopted as broadly amongst OEMs as DPF technology?
  • Should global governments be doing more to help OEMs and Tier suppliers achieve the targets that they have set?"
  • Is the UK's decision to leave the European Union likely to have a detrimental effect on investment in UK automotive R&D from multi-national and overseas companies?
  • With advancements in turbocharger technology over the past decade, is the supercharger dead?
  • As research into and development of synthetic fuels matures, will the eventual death of the IC engine be delayed?
  • Do legislative restraints imposed on passenger vehicles mean that diesel technology will likely only be for off-road and heavy-duty applications in the future?
  • Will the last naturally aspirated, IC passenger car engine be produced within the next decade?
  • Will the findings of Nissan's study, which says EV charging points will outnumber fuel stations in the UK by 2020, be reflected globally in the same time frame?
  • As simulation software increases in accuracy, and quality, are traditional 'real-world' test methods slowly becoming obsolete?
  • In light of Infiniti's variable-compression ratio breakthrough, will this be the key IC engine technology development for decades to come?
  • As ZF confirms its partnership with the Venturi race team, is Formula E set to become an important testbed for suppliers and OEMs, when it comes to e-powertrain innovations?
  • In the last two weeks, the automotive industry has seen two major developments toward improving the fuel efficiency and performance of IC engines. But which one gets your vote:
  • As Federal-Mogul Powertrain announces new materials to deal with increased combustion pressure, are metallurgical advances key to providing continual gains in engine design?
  • Is BMW's all-new quad diesel engine one turbo too many? 
  • Some countries are looking to ban the diesel IC engine by 2025. Do you agree with this legislation?
  • As Bentley announces its first diesel engine, is it time for all car makers to embrace state of the art TDI technology?
  • Do hydrogen fuel cells make more sense for commercial and off-road applications than passenger vehicles?
  • Is the disparity between real world and lab-based emissions testing proof that OEMs and engineers should be consulted and more involved by law makers, early in the legislative process? 
  • Are Renault late to a party that's already ended, with the introduction of an all-new diesel hybrid powertrain - co-developed with Continental, or will the mild 48V system kick start this section of the industry??
  • As a US judge approves a US$14.7bn settlement for VW and its diesel emissions scandal, is this a justifiable figure? 
  • Over its 130 year history, which is the most important IC engine development?
  • With the advancement of GDI technology along with BEVs and FCEVs development, are bio-fuel engines and technology finished? 
  • Do hybrids still have a purpose in future mobility, or has the rapid advancement of technologies for both EV and IC applications rendered the 'middle-step' irrelevant, other than for company car tax purposes?
  • With this in mind, will advances in EV technologies force a major rethink in car architecture and packaging?
  • Is the inclusion of cylinder deactivation on Ford's 1.0-liter, three cylinder engine a case of 'technology for technologies sake'?
  • Does diesel have a shelf life in mass-market passenger vehicles beyond nine years?
  • With several new diesel engines unveiled at Detroit, have the implications of 'Dieselgate' been grossly over exaggerated by mainstream media, and will the fuel source remain in circulation for the foreseeable?
  • The United Kingdom is to introduce a new vehicle excise duty later this year, which will see hybrids reclassified the same as IC engined cars, with only full electric and hydrogen cars exempt. In your opinion, is this fair?
  • As McLaren and Ricardo celebrate the 10,000th M838T 3.8-liter engine being made, is the use of a singular bespoke, yet flexible, engine the correct way to go for smaller OEMs with limited production runs?
  • GM and Honda have begun a joint venture that will ultimately see the mass production of an advanced hydrogen fuel cell system to be used in their future products. Does this signal that this fuel source still has a future in the industry?
  • As VW introduces an all-new 1.5-liter TSI engine to eventually replace the current 1.4-liter motor, has the downsizing trend peaked?
  • As the automotive world readies itself for the introduction of WLTP later in 2017, and RDE standards in 2020, will MPG testing ever be 100% accurate?
  • Is effective after treatment the key to sustaining the life of the IC engine?
  • With Audi, Mclaren, Ferrari, Ford and Toyota all debuting larger and more powerful engines at Geneva Motor Show this week, is the downsizing trend over?
  • Following on from the feature on in-house performance tuning in the latest issue of Engine Technology magazine  (click here), does the rise in popularity of OE-developed performance parts signal the end of the performance aftermarket?
  • As virtual testing continues to develop and increase in accuracy, will the test and development of engines and components become digital only?
  • Is the UK Government's decision to begin scrapping older diesels one based in logic, or finance?
  • Is dynamic wireless charging the key to unlocking an EV's full potential?
  • As EV's continue to develop in terms of outright performance, driving range and usability, and given the choice; would you prefer to work on the development of a clean sheet IC engine design, or a clean sheet EV drivetrain?
  • Read Latest Issue

    International Engine of the Year Awards
    Read Latest Issue
    Read Latest Issue

    Web Exclusive Articles

    Engines on test: Toyota 2ZR-FE
    A new body, which brings increased strength and lighter weight to the party alongside those looks, plug-in capability, and a solar roof mean that whilst familiar, there's an awful lot of all-new in the 2017 Toyota Prius
    Read Now

    Lowering Friction in timing chain drive systems
    DSM Engineering Plastics outlines the importance of timing chain drive systems in the overall role of the IC engine, and as regulators continue to press for more efficient engines timing chains are the one area that can yield further gains
    Read Now

    Engines on test: Lexus 2UR-GSE 5.0-liter V8
    The 5.0-liter, naturally aspirated Lexus GS F is most definitely party up front, business out back; much like a reverse mullet. Only the Japanese super sedan carries it off with much, much more class - and dignity
    Read Now

    Supplier Spotlight

    Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the engine technology industry. Want to see your company included? Contact aboobaker.tayub@ukimediaevents.com for more details.

    فروشگاه اینترنتی فروشگاه اینترنتی سیستم همکاری در فروش کانال تلگرام چت روم دانلود فیلم مرکز خرید ایرانیان

    Submit your industry opinion

    Industry BlogDo you have an opinion you'd like to share with the engine technology community? We'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to d.slavnich@ukimediaevents.com

    Submit Your Recruitment Ad

    Recruitment AdTo send us your recruitment advertising or to receive information on placing a banner please email aboobaker.tayub@ukimediaevents.com